Quote · SYN-2026-001

Site Quantity Analysis

Demo project · synthetic geometry · public-source evidence

Synthetic demo · locked · read only

Example only. This complete screen illustrates the intended Dynamics destination after review. It is not a live tenant capture, customer-approved quantity, connected integration, bid, or engineering certification.

Final reviewed result

Read-only presentation

Net protected area600 sq ft

Overlap material90 sq ft

Installed material690 sq ft

Full-width cuts720 sq ft

Trim offcut30 sq ft

Synthetic inputs

Human-confirmed demo fixture

Geometry: Flat rectangle
Length: 30 ft
Width: 20 ft
Stock strip width: 8 ft
Strip count: 3
Selected overlap: 18 in

Source facts

Public documents

NRCS Construction Specification 495 p.3, section 5, Method 2 · 18-inch unsewn overlap minimum unless otherwise specified

UFGS 31 05 19.13 pp.7-8 · laps, seams, and extra length are distinct from protected payment area

Checked evidence

Review summary

Evidence	Source	Claim used	Review
nrcs-495-p3-method2	NRCS 495 p.3	18-inch unsewn overlap minimum unless otherwise specified	Checked
synthetic-geometry-v1	Demo fixture	30 ft × 20 ft rectangle with 8 ft full-length strips	Checked
deterministic-calculation-v1	Local calculation trace	600 net + 90 overlap = 690 installed sq ft	Checked

Assumptions and limits

Visible with result

No project drawing or customer data is used.
No slopes, trenches, anchors, slack, damage, or waste allowance is modeled.
Full-width cuts are not a stock-roll optimization or complete order.
This result is not a bid quantity, engineering approval, or certified takeoff.

Review history

Illustrative

Draft created: Public sample
Clarification: Quantity distinctions added
Current state: Demo reviewed
Customer acceptance: Not claimed

Need a correction?

Revisions happen in Cowork. This Dynamics view has no edit, approval, or recalculation capability.

Return to the Cowork example

Back to the Customer Hub